A refrigerator that runs constantly can be a sign that the appliance is working harder than it should to keep food safely cold. While occasional cycling is normal, continuous operation often points to a problem in cooling, airflow, or temperature sensing.
1) Dirty condenser coils or clogged airflow
Condenser coils help release heat outside the refrigerator. If they’re coated with dust or pet hair, the compressor may run longer to achieve the set temperature. Similarly, blocked vents inside the unit can prevent cold air from circulating, making the thermostat “think” the refrigerator is still too warm.
2) Thermostat or temperature setting issues
Check whether the temperature dial or digital setting was changed accidentally. Also, a faulty thermostat or temperature sensor can misread the internal temperature, prompting the compressor to stay on continuously. In many cases, the refrigerator will feel colder than expected or, convers
... Read more »
Summer heat can strain kitchen appliances, from refrigerators working overtime to dishwashers running hotter cycles. With a few preventative steps now, homeowners can reduce breakdown risk, improve energy efficiency, and keep food safe.
Start with the biggest heat-sensitive appliance: your refrigerator. Make sure the unit is level, the door seals close tightly, and the condenser coils are clean—dust and debris can force the compressor to run longer. Keep the fridge out of direct sun and away from heat sources like ovens, ranges, or radiators, and allow hot leftovers to cool before placing them inside.
Next, review your oven and cooktop setup. During hot weather, ventilation matters more—use range hoods and ensure vents are not blocked by grease buildup or blocked ductwork. Check oven vents for obstructions and confirm fans and ignition systems respond normally. If your oven shows inconsistent temperatures, consider scheduling calibration before your busie
... Read more »
Dishes that come out dirty usually point to a few repeat offenders: how the dishwasher is loaded, whether the spray arms can move and rinse properly, and whether the right detergent and water temperature are being used. Even small changes—like switching detergent type or repositioning items—can make a noticeable difference.
Below are the most common reasons dishes fail to get clean, along with practical ways to troubleshoot each one.
1) Overcrowded or poorly loaded racks
One of the most frequent causes of dirty dishes is overcrowding. When bowls, plates, and cookware block the spray arms or prevent water from reaching the soiled surfaces, food residue remains—especially on the back row and in corners.
To improve cleaning, leave space between items, face dish surfaces toward the center, and avoid nesting pieces that trap water. Tall items should be positioned so they don’t block the top sprayer.
A dishwasher leaking from the door is a common (and fixable) problem that can lead to water pooling on the floor, damaged cabinets, or slips. Because door leaks typically involve water pressure, drainage, or the door’s sealing system, the cause is often more specific than “a leak somewhere.”
Below are the most frequent reasons a dishwasher leaks from the door and what to do next, from quick, no-tools checks to parts that may need replacement.
1) Check the door gasket and seal condition
The rubber gasket (door seal) along the tub rim is designed to keep water from escaping during wash and drain cycles. If it’s worn, cracked, deformed, or not seating evenly, water can escape at the bottom edge or corners of the door.
What to do: Inspect the gasket for tears, gaps, or hard, flattened areas. Wipe the seal clean and make sure it sits properly in its channel. If the gasket is damaged, replacing it is often the most
... Read more »
