NEWS 📰, Appliance repair, services, guarantee, Brooklyn, NY, installation, refrigerator, dryer, washer, stove, dishwasher, about us. Full service repair of all brands of appliances NYC

E1 - exceeded the water supply, or its limitation, a weak pressure.

It is necessary to check the presence of cold water and pressure in the water.

E2 - Fault drain. Water is not emptied until the end, or an error occurred in the water level sensor. Check whether the drain remains clogged food, clean it if necessary.

E3 - Maximizing heating elements, obtaining optimum water temperature does not occur.

E4 - The flow of water or overflow. The outflow of water or excessive water flow. Cause of occurrence - Gulf valve malfunction, or water level sensor.

E5 - Weak water pressure. Low water in the dishwasher or defective level sensor generations.

E6 - temperature sensor fault. Breakage or short circuit.

E7 - Malfunction of the temperature sensor. Sensor fault or its disconnection.

E8 - Error operation alternate valve. You can not install «FLEX» function valve (FLEXIBLE WASH) in the desired position.

E9 - de ... Read more »

Category: Appliance repair services | Views: 1219 | Added: appliance | Date: 2016-10-17 | Comments (0)

OE - the water is not drained from the dishwasher

IE - water does not enter into the dishwasher

E1- works automatically drain the water from the machine chamber, possible leakage of water from the hose connections

FE - out the water, but the water supply is higher than the permissible level, can be a problem with the inlet valve

NOT - damaged water heating circuit

tE - may be faulty thermistor, in connection with which there is a high water temperature on the pitch

LE - may be faulty dishwasher engine

CE - there was a depressurization of the washing chamber takes place or one of the technical units.

Category: Appliance repair services | Views: 1670 | Added: appliance | Date: 2016-10-17 | Comments (0)

F01 - Error loading hatch. -The door is not properly closed, or something fell between the seal and the hatch.

F02 - No water comes into the drum

F03 - Water drains

F04 - Leaking tank on the pallet

F16 - charging port is not closed

F17 - The time limit for filling the tank with water exceeded. Unlike F02, water enters the tank, but very slowly.

F18 - The time limit for the water drain is exceeded. Unlike the F03, drain made, but very slowly.

F19 - Error when heated. - Washing is continued without heating the water.

F20 - The unauthorized incorporation of PETN.

The machine is switched off. It is necessary to contact with the master.

F21 - Error drive motor

F22 - Error temperature sensor

F23 - Activated mode "Aquastop" - Detected water leakage

F25 - Error Sensor Water Quality

F26 - ... Read more »

Category: Appliance repair services | Views: 5028 | Added: appliance | Date: 2016-10-17 | Comments (0)

PE - It is reported that the water level sensor is working incorrectly or defective

FE - System Message that in the working tank excess water

dE - Reporting is not properly closed or uncovered manhole

IE- The message system of the impossibility collect the water tank

OE - Draining the water can not be done, the problem is in the filter or hose

UE - Disrupted balancing drum, the drum is defective

tE - The system reports an error temperature

LE - The locking mechanism is damaged or defective

CE - The notification system that is overloaded the drive motor

E3 - The system notifies the impossibility of determining the load

AE - The system can not turn off the washing machine automatically

E1 - Report on water leaking into the sump

HE - Water heating is not possible, faulty heater

SE - The drive motor can not be switc ... Read more »

Category: Appliance repair services | Views: 1654 | Added: appliance | Date: 2016-10-17 | Comments (0)

« 1 2 ... 43 44 45 46 47 48 »